Flowserve AKH2 IOM Atomac Lined Ball Valve IOM - Manual (Page 24)

AKH2 - atomac ball valve - full port
Ahaus GmbH
von-Braun-Straße 19a
D-48683 Ahaus
Postfach 1162 D-48661 Ahaus
Telefon: +49(0) 2561-686-100
Fax: +49(0) 2561-686-200
Register: 2
Page: 25
Date: 12.1995
Revision: 02.2009
Technical Manual
Material specification - AKH2 with stem extension
No. Designation Pieces Material Material-No. DIN ASTM / AISI
010 threaded pin 1 stainless steel 1.4301 DIN EN 10088-3 A 193 B8
020 stud bolt 2 stainless steel 1.4301 DIN EN 10088-3 A 193 B8
030 gland follower 1 stainless steel / PTFE-graphite 1.4308 DIN EN 10283 A 351 CF 8
040 distance pipe 1 steel 1.0305 DIN EN 10216-2 A 192
050 gland 1 stainless steel 1.4308 DIN EN 10283 A 743 CF 8
060 serrated lock washer 2 stainless steel 1.4301 DIN EN 10088-3 AISI 304
070 hexagon nut 2 stainless steel 1.4301 DIN EN 10088-3 A 194 8
080 extended stem 1 stainless steel 1.4104 DIN EN 10088-3 AISI 430 F
090 mounting 1 steel 1.0037 DIN EN 10025-2 A 283 B
100 serrated lock washer 4 stainless steel 1.4301 DIN EN 10088-3 AISI 304
110 nster 4 stainless steel 1.4301 DIN EN 10088-3 A 193 B8
Item - No. 010 „threaded pin“ is used with sized DN 15, 20, 25 and 1 / 2“, 3 / 4“, 1“ only.