Flowserve Valtek Mark One K-Bellows Sealed Globe Valves - Manual (Page 8)

Experience In Motion
Regional Headquarters
Flowserve America
1350 N. Mt. Springs Prkwy.
Springville, UT 84663 USA
Telephone: +1 801 489 8611
Fax: +1 801 489 3719
Flowserve Asia
12 Tuas Avenue 20, 638824
Republic of Singapore
Telephone: +65 862 3332
Fax: +65 862 4940
Flowserve EMA
Burrell Road, Haywards Heath,
West Sussex, England RH16 1TL
Telephone: +44 (0) 1444 314 400
Fax: +44 (0) 1444 314 401
Bulletin FCD VLAIM0065-00 (01/2006)
To find your local Flowserve representative please
use the Sales Support Locator System found at
www.flowserve.com
Or call toll free: 1-800-225-6989
Flowserve Corporation has established industry leadership in the design and manufacture of its products. When properly selected, this
Flowserve product is designed to perform its intended function safely during its useful life. However, the purchaser or user of Flowserve products
should be aware that Flowserve products might be used in numerous applications under a wide variety of industrial service conditions. Although
Flowserve can provide general guidelines, it cannot provide specific data and warnings for all possible applications. The purchaser/user must
therefore assume the ultimate responsibility for the proper sizing and selection, installation, operation, and maintenance of Flowserve products.
The purchaser/user should read and understand the Valtek Mark One K-Bellows Sealed Globe Valves instructions included with the product,
and train its employees and contractors in the safe use of Flowserve products in connection with the specific application.
While the information and specifications contained in this literature are believed to be accurate, they are supplied for informative purposes only
and should not be considered certified or as a guarantee of satisfactory results by reliance thereon. Nothing contained herein is to be construed
as a warranty or guarantee, express or implied, regarding any matter with respect to this product. Because Flowserve is continually improving
and upgrading its product design, the specifications, dimensions and information contained herein are subject to change without notice. Should
any question arise concerning these provisions, the purchaser/user should contact Flowserve Corporation at any one of its worldwide operations
or offices.
For more information about Flowserve Corporation, contact
www.flowserve.com or call USA 1-800-225-6989.