Flowserve TRS 5-8 - Manual (Page 10)

10
Tool
■ Screwdriver (5.5/100)
Installation
TRS 5-8 b
On supporting rail (with mounting clip)
1. Clip temperature switch onto supporting rail.
2. Loosen cover screws and unplug cover from its base .
3. Select cable entry and remove corresponding seal.
On mounting panel
1. Loosen cover screws and unplug cover from its base .
2. Unscrew mounting clip .
3. Drill the hole marked in the base to 4.3 mm dia.
4. Fasten base with two M4 screws onto mounting panel.
E D A
C
A E D
F
B