Flowserve MK25/2 - Manual (Page 16)

16
Annex
We hereby declare that the pressure equipment MK 25/2 and MK 25/2 S, nominal
sizes DN 40 - 50, conform to the following European Directive:
■ EC Pressure Equipment Directive (PED) No. 97/23 of 29 May 1997
These steam traps are pressure equipment as defined in article 1, section 2.1.4 of the
PED.
Applied conformity assessment procedure as described in Annex III: Module A
This declaration is no longer valid if modifications are made to the equipment without
consultation with us.
Declaration of Conformity
Quality Assurance Representative
Lars Bohl
Academically qualified engineer
Head of the Design Dept.
Uwe Bledschun
Academically qualified engineer
Bremen, 5 th December 2001
GESTRA AG