Installation, Wiring – Flowserve TRG 5-11 User Manual
Page 13
Advertising
3
Installation
– continued –
Key
Wiring
Use x 0.35 mm² compensating line as supply line. Note that two supply lines per temperature sensor
are required for the safety temperature monitoring function.
D
Measuring tip TRG 5-
H
Measuring tip TRG 5-4
I
Insulation (provided by customer)
J
Elbow
K
Twin PG thread (page 4)
TRG 5-11, TRG 5-41
Note
■
Two supply lines per temperature sensor are required for the safety function
“Temperature monitoring”.
■
The supply lines must go through the twin PG thread into the terminal box,
Fig. 16.
Tools
■
Screwdriver for slotted screws, size .5, completely insulated to DIN VDE 0680-
Advertising
This manual is related to the following products: