Flowserve DK 47L - Manual (Page 15)

Pressure / Temperature Ratings
PMO [bar] 42 PMO [PSI] 609
TMA [°C] 400 TMA [°F] 752
Admissible back pressure: up to 80 % of upstream pressure
Technical Data
╞
Installation
1. Installation in any position, preferably in horizontal lines with cap on top.
2. Observe direction of flow. The flow direction arrow is on the trap body.
3. Leave at least 30 mm free space X around the equipment for removing the cap
(DK 47, DK 57) and/or the sealing plug F (DK 47) at a later date.
4. Install trap.