Fluke Biomedical 6000-528 - Manual (Page 9)

Installation
Installation
2
2-1
CAUTION
Section 2
Installation
2.1 Installation
Ensure all power is removed prior to installing the
Model 6000-528 Ion Chamber.
Installation of the Model 6000-528 External Ion Chamber consists of connecting the signal and high
voltage cables, and performing a calibration.
2.2 Electrical Interface
Final electrical interface connections between the Ion Chamber, and the host instrument are listed in
Table 2-1.
Table 2-1. Electrical Interface Connections
Connector Description
BNC Ion Chamber Output
HV (BIAS) Ion Chamber High Voltage
2.3 Setup
Because the Model 6000-528 External Ion Chamber may be used with NERO® 6000B, 6000M, 4000+, or
the 4000M+ please refer to the applicable instrument manual for instrument set up.