Fluke Biomedical 57-440 - Manual (Page 7)

Usage
Filter Holder and Mounting Instructions
2
2-1
Section 2
Usage
2.1 Filter Holder and Mounting Instructions
A. For conventional, square collimator mounting: Attach two strips of 1" wide tape fastener to
collimator housing outside the field of view. See Figure 1-1. The filter holder should be oriented
perpendicular to the axis of the foot. The filter attaches to the filter holder via the "Quick Stik"
magnetic mounting system.
Figure 1-1. Mounting to a Square Collimator
B. For older model beam-restricting cones, the 1" wide tape fastener should be applied at opposite,
ends of the cone, perpendicular to the axis of the foot. The filter then attaches to the filter holder in
the same manner as conventional collimators. See Figure 1- 2.
Tape Fastener on Back
of Holder
Filter Holder
Collimator
Tape Fastener