Dodge 2008 LX49 Magnum - Manual (Page 108)

• Press and hold the “Voice Recognition” button for 5
seconds until the session begins, or,
• Press the “Voice Recognition” button and say ЉSetup,
Voice Training Љ command.
Repeat the words and phrases when prompted by the
UConnect
௡ system. For best results, the Voice Training
session should be completed when the vehicle is parked,
engine running, all windows closed, and the blower fan
switched off.
This procedure may be repeated with a new user. The
system will adapt to the last trained voice only.
To restore the Voice Recognition system to factory default
settings, enter the Voice Training session via the above
procedure and follow the prompts.
Voice Recognition (VR)
• For best performance, adjust the rear view mirror to
provide at least 1 ⁄
2
inch (1 cm) gap between the
overhead console (if equipped) and the mirror.
• Always wait for the beep before speaking.
• Speak normally, without pausing, just as you would
speak to a person sitting approximately eight (8) feet
away from you.
• Make sure that no one other than you is speaking
during a voice recognition period.
• Performance is maximized under:
• low-to-medium blower setting,
• low-to-medium vehicle speed,
• low road noise,
• smooth road surface,
108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE