Tail/stop, turn signal light, and backup light, Tail/stop, turn signal light, and backup, Light – Dodge 2008 LX49 Magnum User Manual
Page 432
Advertising
![background image](/manuals/76785/432/background.png)
Tail/Stop, Turn Signal Light, and Backup Light
1. Open the liftgate.
2. Remove tail light access cover.
3. Push the electrical connector locking tab to the side.
4. Disconnect the electrical connector.
5. Remove 1 wing nut from the back of the tail light
assembly.
6. Remove 2 push pin fasteners under the liftgate with a
flat blade tool.
7. Pull tail light assembly clear from vehicle to access
bulbs.
432
MAINTAINING YOUR VEHICLE
Advertising
This manual is related to the following products: