Fluke Biomedical 940-513 - Manual (Page 17)

Maintenance and Calibration
Maintenance
4
4-1
Section 4
Maintenance and Calibration
4.1 Maintenance
The Model 940-513 Sampler is designed to operate for extended periods of time with no scheduled
maintenance required. However, periodic inspections may be performed to verify system integrity has not
degraded. This would include the integrity of the cable connectors and the tightness of the mounting
hardware. Dust and dirt may be removed by wiping the surface of the sampler with a damp cloth.
NOTE
If a maintenance question arises, please contact the FLUKE
Biomedical Radiation Management Services Customer Service
Department at (440) 248-9300 for assistance.
4.2 Calibration
The Model 940-513 Sampler is designed for use with the Model 943-27-31 Detector. Refer to the Model
943-27-31 Instruction Manual for detector calibration instructions.