Delfield 204P - Manual

Project __________________________________
Item ____________________________________
Quantity ________________________________
CSI Section 11400
Approved _______________________________
Date ____________________________________
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
Top is 18-gauge stainless steel, has 1.37”
(3.49cm) overhang all around. Glass filler is 9.5”
(24.1cm) high, over die-stamped drain opening
fitted with chrome-plated wire strainer. Pitcher
filler is 13.5” (34.3cm) high, over die-stamped
drain opening fitted with chrome-plated wire
strainer. Ice bin opening is die-stamped with
.19” (.48cm) raised edges, measures 15.12” x
10.5” (38.4cm x 26.7cm), has one-piece 20-
gauge stainless steel lift-off cover.
Liner of ice bin is high-impact ABS plastic,
has rounded corners and is pitched to 1”
(2.54cm) diameter drain. Bin is insulated all
around with high-density environmentally
friendly, Kyoto Protocol Compliant, Non ODP
(Ozone Depletion Potential), Non GWP (Global
Warming Potential) polyurethane. Ice bin holds
45 pounds of ice.
Exterior body is 24-gauge galvanized steel.
Cutout dimensions are 21” (53.3cm) x 17.17”
(45.1cm).
Specifications
Standard Features
Top is 18-gauge stainless steel with
raised die stamped opening
Chrome plated wire strainer
Glass filler is 9.5” high
Pitcher filler is 13.5” high
One-piece 20-gauge stainless steel
lift-off cover with handle
Liner of ice bin is high-impact ABS
plastic with coved corners
1” diameter drain plumbed out the
bottom
High density environmentally
friendly, Kyoto Protocol Compliant,
Non ODP (Ozone Depletion
Potential), Non GWP (Global
Warming Potential) polyurethane
foam throughout unit
Exterior tank is made of galvanized
steel •
•
•
•
•
•
•
•
•
204 Water and ice station with glass filler
204P Water and ice station with pitcher filler
•
•
Models
204 Series
Water And Ice Station
20
4 S
eri
es
W
ate
r A
nd
Ic
e S
ta
tio
n
204