Foxconn nT-A3800 - Manual (Page 28)

4
23
4-2 Install Drivers in Windows 7/8
1. When the Windows 7/8 is completely installed, you have to install the necessary drivers before
using the NanoPC. Connet the USB Flash Disk.(USB Flash Disk in this package)
2. Waiting for a few seconds, the main menu will be displayed on the screen.
3. Use these options to install all the drivers for your system. You must click "AMD Chipset Driver"
to install it first. After that, you can click ”One Click Setup” and then choose the items you want
to install, or you can click on each individual driver to install it manually.
4. After all the drivers are installed, you need to restart your NanoPC, then you can start using it.