Foxconn nT-270 - Manual (Page 15)

3
11
Make sure you have these ready:
1. NETDVD. (It is an optional accessory. If there is no NETDVD in this package, you need other
purchase an external USB DVD-ROM drive.)
2. NETBOX driver CD. (In this package)
3. Windows XP Install CD. (Other purchase)
Before we continue:
■ Your NETBOX power is off.
■ Connect the NETDVD or USB DVD-ROM drive to one USB port of NETBOX and power it on.
3-1 Install Windows XP
1. Push power on button to turn on your computer, then press <Del> key to enter BIOS Setup.
2. Put the Windows XP Install CD into the USB DVD-ROM drive.
3. Select and go to the “Boot” menu, enter “Boot Device Priority”, set the “1st Boot Device” to
“USB: Optical DVD RW”, press <F10> key to save change and exit BIOS.
Boot Device Priority Specifies the boot
sequence from the
1st Boot Device [USB:Optical DVD RW] available devices .
2nd Boot Device [SATA:PM-FUJITSU MH]
3rd Boot Device [USB:Generic STORAG]
A device enclosed in
parenthesis has been
disabled in the
corresponding type
menu.
←→ Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
Boot
BIOS SETUP UTILITY