Install drivers in windows 7, Install drivers in windows 7/8 – Foxconn nT-i2847 User Manual
Page 31
Advertising
4
26
Install Drivers in Windows 7/8
1. When the Windows 7/8 is completely installed, you have to install the necessary drivers before
using the NanoPC. Connet the USB Flash Disk.(USB Flash Disk is in this package)
2. Waiting for a few seconds, the main menu will be displayed, click “Driver” to enter the Driver
menu shown as below:
3. Use these options to install all the drivers for your system. You must click "Intel Chipset Driver"
to install it first. After that, you can click "One Click Setup" to install all the other drivers, or you
can click on each individual driver to install it manually.
4. After all the drivers are installed, you need to restart your NanoPC, then you can start using it.
Advertising