Foxconn CK804K8MA-KS - Manual (Page 25)

17
Chapter 2 Installation Instructions
CK804K8MA Series User Manual
Power LED Connector (PWRLED)
Attach the connector to the Power LED on the front panel of the case. The Power
LED indicates the power supply status. When the system is in S0 status, the
LED is on. When the system is in S1 status, the LED is blink. When the system
is in S3, S4, S5 staus, the LED is off.
Power Switch Connector (PWRBTN#)
Attach the connector to the power button of the case. Pushing this switch allows
the system to be turned on and off rather than using the power supply button.
USB Connectors: F_USB 1, F_USB 2
Besides four USB ports on the rear panel, the series of motherboards also
have two 10-pin headers on board which may connect to the front panel USB
cable to provide additional four USB ports.
IrDA Connector: J47
The IrDA infrared transmission allows your com-
puter to send and receive data via an infrared ray.
The relevant parameters for the BIOS Integrated
Peripherals should be set prior to using this
function.
Connect the CPU cooling fan cable into the 3-pin
CPU_FAN on the motherboard. Connect the sys-
tem cooling fan cable into the 3-pin SYSFAN on
the motherboard.
FAN Connectors: CPU_FAN, SYSFAN
SYSFAN
CPU_FAN
F_USB1
D4+
D4-
Empty
GND
VCC VCC
GND
D5-
D5+
2 1
NC
10 9
F_USB2
D6+
D6-
Empty
GND
VCC VCC
GND
D7-
D7+
2 1
NC
10 9
1
Empty
+5V
GND
IRRX IRTX
CK804K8MA-manual-V1.0-111704.p65 2004-11-19, 14:51 17