Foxconn A7GMX Series - Manual (Page 42)

3
35
IDE Configuration
► Onboard PCI IDE Controller
[Disabled]: Disable the integrated IDE controller.
[Enable]: Enable the integrated IDE controller.
► OnChip SATA Channel
[Disabled] : Disable SATA controller.
[Enabled] : Enable SATA controller.
► OnChip SATA Type
This item is used to set the operating mode of your SATA ports.
Options : [Native IDE]; [RAID]; [AHCI]; [Legacy IDE].
[Native IDE] - This configures the SATA ports to support native IDE mode.
[RAID] - When you enable RAID, it means all your SATA drives must also support AHCI.
[AHCI] - The Advanced Host Controller Interface (AHCI) specification describes the register
level interface for a Host Controller for Serial ATA. The specification includes a description of
the hardware/software interface between system software and the host controller hardware.
AHCI provides more advanced features including SATA features, but some SATA drives may
not support AHCI, unless they are labeled with AHCI support in its specification.
If your motherboard supporting AHCI, and you have a SATA device, which also supports AHCI,
then you can select IDE option to have fair performance (only PATA, SATA level), or you can
select AHCI to get its best performance.
[Legacy IDE] - This configures the SATA ports to support legacy IDE mode which is running
for old Windows system .
CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.
IDE Configuration
IDE Configuration Help Item
Onboard PCI IDE Controller [Enabled] Disabled: Disable the
OnChip SATA Channel [Enabled] I IDE controller.
OnChip SATA Type [Native IDE] Enabled: Enable the
IDE controller.
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
[Enabled]