Foxconn M61PMX - Manual (Page 72)

5
65
5-2 RAID enable in bIoS
1. Enter the BIOS setup by pressing <DEL> key when boot up.
2. Select the “Standard CMOS Features” from the “Main menu”, then select the
“Configure SATA as” menu and press <Enter> to go to the configuration items.
3. Enable RAID function and individual SATA port for hard drive or DVD connection.
4. Press <F10> to save the setting then PC will reboot itself.
5-3 Select a RAID Array for Use
When BIOS is restarted, it will display a message asking you to press [F10] key to
enter the main menu of MediaShield BIOS. Press [F10], the screen appears.
At the bottom of each screen displayed, there is one line listing each key’s function,
such as <Tab>, <Enter>, <ESC>...etc. It is helpful to make your choice easier.
Phoenix - AwardBIOS CMOS Setup Utility
Standard CMOS Features
Date (mm:dd:yy) Wed, Mar 12 2008 Item Help
Time (hh:mm:ss) 18 : 30 : 59
Menu Level ►
► Primary Master [ None] Chage the day,month
► Primary Slave [None] year and century
► SATA Port 1 [ST3160815AS]
► SATA Port 2 [TSSTcorp CDDVDW TS-H]
Driver A [ 1.4MM,3.5 in]
Halt On [All , But Keyboard]
Configure SATA as [RAID]
Install Memory 2048MB
Memory Speed 800 MHz
BIOS ID MCP61M01.02.F1.D.03
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F7: Setup Defaults
MediaShield Utility Aug 21 2006
- Define a New Array -
RAID Mode: Mirrored Stripe Block: Optimal
Free Disks Array Disks
Port Disk Model Capacity Port Disk Model Capacity
[+] Add
[ESC] Quit [F6] Back [F7] Finish [TAB] Navigate [↑↓] Select [ENTER] Popup
Optimal
0.0 WDC WD1200JD-9 111.79GB
1.0 Hitachi HDT725 232.88GB
Mirroring
1.1 ST3320620AS 298.09GB