Foxconn A88GML - Manual (Page 80)

5
73
5-2 RAID enable in bIoS
1. Enter the BIOS setup by pressing <DEL> key when boot up.
2. Select the “Integrated Peripherals” from the “Main menu”, then select the
“Onboard
SATA Mode” menu and press <Enter> to go to the configuration items.
3. Enable RAID function and individual SATA port for hard drive or DVD connection.
4. Press <F10> to save the setting then PC will reboot itself.
5-3 Select a RAID Array for Use
When BIOS is restarted, it will display a message asking you to press [Ctrl-F] key to
enter the main menu of Option ROM Utility. Press [Ctrl-F], the Main Menu appears.
Option ROM Utility (c) 2008 Advanced Micro Devices, Inc.
View Drive Assignments. . . . . . [ 1 ]
LD View / LD Define Menu . . . . [ 2 ]
Delete LD Menu . . . . . . . . . . . . [ 3 ]
Controller Configuration . . . . . . [ 4 ]
[ Main Menu ]
Press 1..4 to Select Option [ESC] Exit
[ Keys Available ]
CMOS Setup Utility - Copyright (C) 1985-2011, American Megatrends, Inc.
Integrated Peripherals
► USB Configuration [Press Enter] Help Item
Onboard SATA Controller [Enabled]
Onboard SATA Mode
Onboard Audio Controller [Enabled]
Onboard LAN Controller [Enabled] Native IDE
Onboard LAN Boot ROM [Disabled] RAID
Serial Port1 Address [3F8/IRQ4] AHCI
Serial Port1 Mode [Normal]
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
Options
[RAID]