Foxconn D180S - Manual (Page 36)

BIOS SETUP
29
Boot
Boot Configuration
Bootup Numlock State [On]
Quiet Boot [Enabled]
Fast Boot [Disabled]
▶ CSM Configuration
Boot mode select UEFI
FIXED BOOT ORDER Priorities
Boot Option #1 [UEFI Hard Disk]
Boot Option #2 [UEFI CD/DVD]
Boot Option #3 [UEFI USB Hard Disk]
Boot Option #4 [UEFI USB CD/DVD]
Boot Option #5 [UEFI USB Key]
Boot Option #6 [UEFI USB Floppy]
Boot Option #7 [UEFI Network]
▶ USB HardDisk Drive BBS Priorities
▶ USB KEY Drive BBS Priorities
▶ UEFI Boot Drive BBS Prioriies
Select the keyboard
NumLock state
→ ←: Select Screen
↑ ↓/Click: Select Item
Enter/Dbl Click: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Main Advanced Boot Power Health Security f-center Save&exit
► Bootup Numlock State
This item defines if the keyboard Num Lock key is active when your system is started. The
available settings are: On (default) and Off.
► Quiet Boot
This item is used to enable/disable the quiet boot.
[Disabled] : Displays the normal POST messages.
[Enabled] : Displays OEM customer logo instead of POST messages.
► Fast Boot
This item is used to enable or disable boot with initialization of a minimal set of devices required
to launch active boot option. This is no effect for BBS boot options.
► FIXED BOOT ORDER Priorities
These items are used to set the system boot order.
► Hard Disk Drive BBS Priorities / CD/DVD ROM Drive BBS Priorities/USB Floppy Drive
BBS Priorities / USB CD/DVD ROM Drive BBS Priorities / USB HardDisk Drive BBS
Priorities / USB KEY Drive BBS Priorities / NETWORK Device BBS Priorities / UEFI Boot
Drive BBS Priorities
This items appear only when the devices are available. Use this items to specify the boot
device priority sequence of the detected devices.