Foxconn D250S - Manual (Page 40)

► Discard Changes and Reset
If you select this option and press <Enter>, a message will �e displayed in the screen.
Select [Yes] to exit setup utility and reset computer without saving your modifications, select
[No] or <ESC> to return to the main menu.
► Restore Defaults
Optimal defaults are the �est settings of this mother�oard.
Always load the Optimal defaults after updating the BIOS or after clearing the CMOS
values.
Select this option and press Enter, it will pop out a dialogue �ox to let you load the defaults.
Select <Yes> and then press <Enter> to load the defaults. Select <No> and press <Enter>,
it will not load.
By this default, BIOS have set the optimal performance parameters of system to improve
the performances of system components. But if the optimal performance parameters to �e
set cannot �e supported �y your hardware devices (for example, too many expansion cards
were installed), the system might fail to work.
► Boot Override
BIOS auto detect the presence of connected devices, select the device you want to �oot from
and press <Enter>, then the system will directly �oot from the selected devices.
Reset without saving?
Yes No
Reset Without Saving
Yes
Load Optimized �efaults?
Yes No
Load Optimized �efaults
Yes