Integrated peripherals, Onchip ata devices – Foxconn P55A Series User Manual
Page 38
3
31
Integrated Peripherals
► OnChip ATA Devices/OnBoard Devices/SuperIO Configuration/USB Configuration
Press <Enter> to go to relative submenu.
OnChip ATA Devices
► Configure SATA as
This item is used to set the operation mode of your SATA ports. Setting values are: [IDE];
[RAID]; [AHCI]; [Disabled].
[IDe] - This configures the SATA ports to support IDE mode.
[RAID] - When you enable RAID, it means all your SATA drives must also support AHCI.
[AHCI] - The Advanced Host Controller Interface (AHCI) specification describes the register
level interface for a Host Controller for Serial ATA. The specification includes a description of
the hardware/software interface between system software and the host controller hardware.
CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
Integrated Peripherals
► OnChip ATA Devices
[Press Enter]
Help Item
► OnBoard Devices
[Press Enter]
► SuperIO Configuration
[Press Enter]
OnChip ATA Devices
► USB Configuration
[Press Enter]
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
[Press Enter]
CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
OnChip ATA Devices
Configure SATA as
[IDE]
Help Item
SATA#1 Configuration
[Enhanced]
SATA#2 Configuration
[Enhanced]
IDE Detect Time Out
[35]
Marvell 6121 PATA and eSATA [eSATA + IDE]
I IDE
RAID
AHCI
Disabled
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
[IDE]
Options