Foxconn Q57M - Manual (Page 42)

3
35
PnP/PCI Configurations
CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
PnP/PCI Configurations
Clear NVRAM Help Item
Plug & Play O/S [No]
PCI latency Timer [64] Clear NVRAM during
System Boot.
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F7:Previous Values F8:Fail-Safe Defaults F9:Optimized Defaults
[Disabled]
► Clear NVRAM
This item is used to set whether clear NVRAM during system booting or not.
Setting options: [Enabled] and [Disabled].
► Plug $ Play O/S
This item is used to configure the Plug and Play(PnP) devices.
[No]: lets the BIOS configure all the devices in the system.
[Yes]: lets the operating system configure Plug and Play (PnP) devices not required for boot if
your system has a Plug and Play operating system.
► PCI Latency Timer
This item is used to set the value in units of PCI clocks for PCI device latency timer register.