Foxconn 6514MR-ES - Manual (Page 4)

4
You can clear CMOS to restore default system setting. To clear the CMOS, follow
the procedures described below.
1. Turn off the system and unplug the AC power.
2. Remove ATX power cable from PWR1 connector.
3. Short pins 1 and 2 on the jumper.
4. Return the jumper to the normal setting by locking pin 2 and 3 together with the
jumper cap.
5. Turn the system on. The BIOS is returned to the default settings.
1. Clear CMOS Jumper
Normal (default)
Clear CMOS
Clear CMOS Jumper
The default status for VRM9-EN1 is open, which supports the Prescott and
Northwood CPU. If the jumper set as closed, then it supports the Willamette
CPU.
2. CPU Model Selection Jumper
1
1
1 2
Open
(default)
Closed
1 2
VRM9-EN1