Foxconn 915M03-G-8EKRS2 - Manual (Page 103)

Chapter 6 Special BIOS Functions
95
915M03 Series User Manual
CHANGE PASSWORD Introduction:
Select CHANGE PASSWORD to enter the Change Password interface.
A. Enter the old password first. Press <Enter> if password is null.
B. Enter the new password. Then enter the same again to confirm it.
C. Press <Enter> for null password.
D. The password will be saved in the hidden partition.
4. Back to Main:
This item is used to exit the Recovery interface.
3. Recover Hard disk Data:
This item is used to restore the backed up data from the hidden partition.