Foxconn G45M - Manual (Page 34)

3
27
► Run Setup Over Clock
This setting is used to detect a CPU clock value which can be run in your overcolck system
without risk. Select [OK], and press [Enter], then BIOS will increase CPU clock step by step,
drive the system to its maximal speed until it can not drive any more and restarts itself. During
the process, you can press [q] or [Q] to stop it.
When the overclock test is running, you must always remember the current CPU clock value
on the screen. When the maximal clock value is reached, system will restart itself, and a mes-
sage displays :
System recovers from Setup Over Clock
Press F1 to Resume
You can then press [F1] to continue, press [Del] to enter BIOS again, and select "O.C. Con-
figuration" menu, enter an appropriate CPU clock value (smaller than the latest CPU clock
value shown on the screen before your PC restarts ) in “CPU Clock” option, and start running
your overclock system.
Voltage options
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Voltage Options
Voltage Options Help Item
CPU Voltage Setting [0]
DIMM Voltage Control [Disabled]
NB Voltage Control [Disabled]
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
0
Adjustment CPU VID
Voltage via ITE8720
range:1.1V~1.58V
step :6.25mV
► CPU Voltage Setting
This option is used to change the CPU voltage in a step of 6.25mV. The voltage can be incre-
mented from +1.1V to +1.58V.
► DIMM Voltage Control
This option is used to change the DIMM voltage in a step of 50mV. The voltage can be incre-
mented from +50mV to +600mV.
► NB Voltage Control
This option is used to change the North Bridge voltage in a step of 50mV. The voltage can be
incremented from +50mV to +600mV.