Foxconn P31A-S User Manual
Page 35
Chapter 2 BIOS Description
29
6.1 Init Display First
This item is used to set which display device will be used first when your PC
starts up.
6.2 Reset Configuration Data
This item is used to set whether the system is permitted to automatically
distribute IRQ DMA and I/O addresses when each time that the machine is
turned on. The setting values: [Disabled]; [Enabled].
6.3 PCI/VGA Palette Snoop
If you use a non-standard VGA card, use this option to solve graphic accelera-
tion card or MPEG audio card problems (e.g., colors not the accurate display).
PCI Express relative items
6.4 Maximum Payload Size
This item is used to set the maximum TLP payload size for PCI Express
devices. The unit is byte.
7.PC Health Status
6.PnP/PCI Configurations
PnP/PCI Configurations menu
PC Health Status Menu
7.1 Case Open Warning
This item is used to enable or disable case open warning function.
PDF 文件使用 "pdfFactory" 试用版本创建