Dual XDVDN9131 - Manual (Page 24)

XDVDN9131 OPERATION
23
Screen Setup Menu
From the main menu, press • SCREEN SETUP icon to access the Screen
Setup mode.
Press the
• PAGE DOWN icon to access the Version List (pages 2 and 3).
Select desired parameter you wish to change. •
Page will return back to previous screen after 15 seconds of inactivity or by •
pressing the RETURN arrow in the top right corner.
Press the • PAGE UP icon to access Screen Setup page 1.
SCREEN Setup Menu matrix
Screen Setup - Menu
Settings Default Options Function
Brightness 10
(OSD)
0 - 20
(OSD) Press  or  on the remote, then press OK to adjust the
brightness to the desired setting. Brightness can also be
adjusted by touching the Brightness + and - buttons.
Screen Tilt 2 1 - 4 Select 1 to 4 to adjust the default tilt angle of the screen
TS Calibrate Calibration Touch Calibration to enter the Touch Screen calibration mode
Version List Displays software version of unit (pages 2 and 3)
L