Foxconn BLACKOPS - Manual (Page 84)

77
5
1. Find another PC, put a diskette into its
floppy drive, this diskette will be formatted
later. Put the BLACKOPS driver CD into
CD-ROM drive, the screen will come out.
Click on " Create RAID Driver Floppy" icon.
2. Depending on each platform of your XP
system, normally, it is a 32-bit system.
Click on "
Create�32-bit� Intel MSM SATA
RAID floppy" to create the diskette.
3. Click "GO" to start.
4. Select the desired destination FDD drive.
It can be the default drive A: or any USB
FDD. Click "OK" to continue.
5. Insert a diskette, click "OK" to continue.
5-1 Create a RAID driver diskette
If you want to install a brand new Windows XP on a AHCI or RAID system, you need to
configure the SATA Mode in BIOS to either AHCI or RAID first. You also need to create
a RAID driver diskette for use in installing your Windows XP system.
Windows Vista has native RAID driver in itself, you can skip these steps.