Dual XR4110 - Manual (Page 7)

7
XR4110 OPERATION
USB/SD Card Operation
Play MP3/WMA files from many mass storage devices by
connecting them to the XR4110's USB port.
To play MP3/WMA files from an SD card, insert an SD card
into the XR4110's SD card slot with the label facing left. It will
click into place when properly inserted. To remove the card,
press in until it clicks, then pull to remove.
When a USB or SD card device is first connected, playback
will begin automatically.
Depending on the number of files
and folders, the device may take several seconds to begin
playback. If no valid MP3/WMA files are detected, "USB" or
"SD" will continually be displayed.
Press TRACK
ll
to skip to the beginning of the next track.
Press TRACK
nn
to return to the beginning of the current
track. Pressing TRACK
nn
again skips to the beginning of
the previous track.
Note: Track numbers are specific to the current folder and
will restart at 1 for each folder.
Press and hold TRACK
ll
or TRACK
nn
to fast forward
or reverse a track.
Press
l
/ II to temporarily stop USB playback.
Press
l
/ II again to resume playback.
Press to select the previous folder.
Press to select the next folder.
Note: Any files that are located on the root directory of the
USB/SD card device will be accessed as folder 1 (F01).
Press RPT to continuously repeat the current track. Press
RPT again to cancel.
Press RDM to play all the tracks in the current folder in
random order. Press RDM again to cancel.
Connecting a USB Device
(sold separately)
Inserting an SD Card
(sold separately)
Playing Music
Track Select
Fast Forward and Reverse
Pause
Folder Access
Repeat
Random