Dodge 2009 Caliber SRT4 User Manual
Page 236
Advertising
![background image](/manuals/76876/236/background.png)
Installing Subwoofer
1. Align the right outside edge of the subwoofer with the
outside edge of the rib located on the load floor.
2. Slide the subwoofer toward the front of the vehicle so
that the rear edge lines up with the end of the load floor.
NOTE:
The left outside edge of the subwoofer will not
line up with a rib on the load floor.
3. Connect the electrical connector.
234
UNDERSTANDING YOUR INSTRUMENT PANEL
Advertising
This manual is related to the following products: