Q-See QSEE H264 - Manual (Page 7)

12 13
1
10 11
3 5 2 4 2 6 8 9 7
1 3 4 5 6 7 8 9 10 11 2
12 13
ITEM NAME FUNCTION
1 POWER Power On/Off
2 NUMBER
BUTTONS
Select individual channels and enter data where required
3 DIRECTION Navigates through selections in menus
Selects viewing mode - Full Screen or 4-Channel Multi-Screen
View
4 ENTER Confirm Selection
5 MENU Opens the Main Menu
Increases the value in Setup mode
6 PLAYBACK
CONTROLS
In addition to normal DVR playback and record operation, the
following have additional functions:
RECORD Controls Focus in PTZ mode
REVERSE Controls Speed in PTZ mode
STOP/ESC Exits current interface or status
Also switches video output mode.
7 SEARCH/
ZOOM
Enter Search mode
Controls Zoom function in PTZ mode
8 INDICATOR
LIGHT
Shows power status of the DVR
9 INFRARED
WINDOW
Receives signals from the remote control
10 BACKUP Enter Backup mode
Decreases the value in Setup mode
11 USB PORT Used for external USB backup devices.
ITEM NAME FUNCTION
1 AUDIO IN 4 Channels of audio input
2 VIDEO IN Video input from up to 4 cameras
3 AUDIO OUT Audio output for amplified speaker
4 SPOT OUT Connect to another monitor as an auxiliary output channel. This
monitor will only display video and will have no menu access.
5 VIDEO OUT BNC connector for TV or monitor
6 PTZ Connections for Pan-Tilt-Zoom speed dome cameras. Y = “+” Z
= “-”
7 K/B Connector for a PTZ keyboard
8 ALARM OUT 1 Channel relay output for external alarms
9 ALARM IN 4 Channel input for external sensors and alarms
10 LAN Network (ethernet) port
11 USB PORT For the USB mouse
12 VGA PORT VGA output for 19” or larger monitor
13 DC IN Power input for 12V DC power supply
REAR PANEL
QT454
FRONT PANEL