FSR IT-AS411 Series - Manual (Page 13)

13
9 Response Request
The user will be able to suppress all responses from the IT-AS411 if they like. The
user should ensure that all subsequent requests to the IT-AS411 are properly formatted
as it would be difficult to ascertain their correctness without a response. The format for
the Response request is as follows:
RSP “Y”|”N” <cr>
Syntax: RSP <”Y”|”N”><cr>
Where:
RSP
Response Request header.
“Y”|”N” Y = response enabled, N = response disabled
Example:
RSP Y<cr> – Response requested.
RSP N<cr> – Response suppressed.