Fusion MS-RA50 - Manual (Page 12)

12 12
ADDING AND REMOVING PRESETS
The RA50 allows you to set up your favorite AM/FM stations as presets for easy recall.
Note:
Up to 15 presets can be stored for each radio band.
When you are using the tuner, the Play / Pause, Forward, Backward, and Menu keys provide
special options to allow you to work with preset frequencies (AM/FM).
To add a new preset:
Do one of the following.
1. Tune the RA50 to the required frequency.
2. Press and hold down the Play / Pause key. The message: “Preset saved” is displayed
briefly.
or
1. Press the Menu key.
2. Turn and then press the Encoder to select Presets > Save current. The message: “Preset
saved” is displayed briefly.
Note: New presets must be unique. If you try to create a preset for the same frequency as an
existing one, the unit displays the message “Previously saved”.
To remove one or more presets:
1. Press the Menu key.
2. Turn and then press the Encoder to select Presets > Remove preset.
3. Do one of the following (there is no warning or confirmation prompt before deletion):
• Select Remove all presets and press the Encoder to remove all current presets.
The message: “Presets removed” is displayed briefly.
• Select a preset and press the Encoder to remove the selected preset. The selected
preset is removed from the list.
4. Press the Menu key (or leave to time out) to exit.
Encoder Menu key Play / Pause Forward Backward
21
Figure 8 – RA50 cable connection diagram
RA50 CABLE CONNECTION DIAGRAM