Fuuvi Bee - Manual

■ Before Use
① The battery for this camera is chargeable. Please charge the battery full before use.
When the affixed USB cable and the camera is connected,
you will hear 2 peeping sounds and the battery begins to
charge. The LCD monitor displays PPP while charging.
・ Be careful not to insert the micro SD card in the wrong direction. It may cause damage.
● File format : Still image…JPEG Movie…AVI ● Quality of still image：1280×960
● Quality of movie ：640×480/30fPs ● Number of pixels : 2.0 megapixels
● Lens：F 2.8 f=1.56 ● ISO : 100 ● Shutter speed : 1/6 - 1/2500secs
● Built-in lithium ion battery
(Chargeable by connecting the camera and computer with an USB cable)
● Storage media：Micro SD/SDHC (Max 16GB) ● Size：76 × 73 × 20 mm / Weight 39 g
● Interface ：USB1.1 ● Continuous shooting time : about 100 minutes
（※When
fully charged : If you continue to shoot straight.） ● Notes：Driver is not necessary
（The computer reads as an external media when the camera is connected to the computer with an USB cable.)
while charging
■ How to Switch the Camera Off
ON … Press the power switch button once. You will hear a short peeping sound,
and the power is switched on.
OFF … Press the power switch button on the camera for 2 seconds. You will hear
a long peeping sound, and the power is switched off.
T he power will be automatically switched off in the following cases:
●If you do not operate the camera for 30 seconds. ●If the micro SD card is not being set, or the
micro SD card is not being read correctly. ●When the battery runs out while filming. The data
will be automatically saved before the power is switched off. ●When there is not enough
memory in the micro SD card. The data will be automatically saved before the power is switched off.
※ Push the card with your nail deeply until the micro
SD card is locked.
※ If your camera does not operate even the micro SD
card is being set, format your micro SD card, or try another card.
■ How to Check the Filming Mode
You can change the filming mode by pressing the Mode button.
Mode for Taking Photographs. Number of photographs recorded in
the camera will be displayed. It will be displayed 0 originally. When the number
photographs exceeds 1000, it will be displayed 999.
Mode for filming movies. Press the shutter button once. You will hear
a long peeping sound once, and the filming starts. Press the shutter once more
to end filming, and the movie data will be saved.
■ How to Review your Data
You can review your photographs and movies by connecting the camera and your
computer with the affixed USB cable.
＜
When using Windows＞
① Start up your computer. Connect the camera
with the USB cable to the USB port of your
computer. Your data will be read in your
computer as removable disc.
② Access to My computer from the START Menu on your
computer. Open your file by double clicking removable disc.
③ Open DCIM folder, then 100DSCIM folder.
Your photographs and movies will be saved in this folder.
＜ When Using Mac OS＞
①
② Open DCIM folder, then 100DSCIM folder.
Your photographs and movies will be saved in this folder.
● We recommend you to prepare a micro SD card exclusively for this camera.
If you share the same card with another equipment,
it may cause troubles when reviewing and saving data.
● If you connect the camera using an USB hub, the operation may not be stable.
In this case, please do not use a hub.
● We cannot compensate the incidental damages resulting from use with this product,
and failure of this product (expenses necessary to review and record,
loss etc. of the profits which will be obtained by the review, and record).
● No responsibility can be taken at our company to the damage of other equipments
which is caused by the use of this product, etc.
● Never perform decomposition and reconstruction. It may cause an electric shock.
● Keep the product and micro SD card away from reach of children.
It may cause choking or other accidents.
● Do not give a strong shock to this product.
● Do not wet the camera, or touch it with a wet hand. It may cause an electric shock.
● The following may cause generation of heat, a burst, a fire, failure, and discoloration.
Please be careful of the following cases:
・ Usage and storage in a dusty, hot and humid place.
・ Usage and storage near fire, and direct sunray for long hours.
【 Publisher 】 F U U V I C O . , L T D http://www.fuuvi.com
Original WEBsite
h t t p : / w w w . f u u v i . c o m / b e e
※ When you want to delete your data
Delete your data from your computer following the above procedures.
(You cannot delete your data from the camera）
② ③
・ This camera does not operate without the micro SD card. If you switch the power on
without a micro SD card, the LCD monitor displays FFF, and you will not be able to
operate your camera. The power automatically switches off in 30 seconds.
open open open
Click the icon, Disconnecting hardware on the right bottom your desktop.
Choose USB large memory device and disconnect the camera.
How to Disconnect the Camera
T r o u b l e s a n d S o l u t i o n s
C a n n o t fi l m
T h e c a m e r a f r o z e ,
o r o t h e r t r o u b l e
o c c u r r e d
T h e p o w e r d o e s n o t
s w i t c h o n
T h e c o m p u t e r d o e s
n o t r e a d t h e c a m e r a
・The battery may be low. Please charge your battery.
・Check if your micro SD card is set correctly.
・ Please make sure it is securely connected to the camera and
computer with a USB cable. Also, if you are using a USB hub,
etc. Please try USB port of the PC. If you have multiple USB
port of the PC, Please try a different USB port.
・Check if your micro SD card is set correctly in the camera.
・There may be some trouble with your micro SD card. Format your
micro SD card on your computer, or try another card. (All data in
the micro SD card will be deleted when you format your card)
・You cannot film when there is not enough memory in the micro
SD card.
・The battery may be low. Please charge your battery.
・ Format your micro SD card, or try another card.
・Reset the camera by pressing the reset button next to the MODE
button on the camera with a sharp point.
※ If your computer does not the read within 30 seconds, repeat the procedure once more.
※ Save your data in your computer before copying or deleting the data in the SD.
※ You may not be able to play back large sized movies saved in the USB smoothly.
Save your data in your computer before playing it back.
※ You can read the data in your micro SD card on your computer by using a card reader, etc (
sold separately ).
Drag and drop the icon of the camera to the trash can, and then disconnect the camera.
C a u t i o n s f o r U s e
--------------------------------------------------------------------------------------------------------------------------
② Set the micro SD card into the slot at the bottom of the camera.
micro SD
Card Slot
USB Port
tripod
Strap Hole
Finder
LCD monitor
Power / Mode button
Shutter
Button
Lens
How to Film Movies
① Switch the power ON.
② Film a movie. Press the shutter button once. You will
hear a long peeping sound once, and the filming starts.
The display on the LCD monitor blinks while filming.
③ End filming. Press the shutter button. You will hear a long peeping sound once,
and the filming ends.
How to Take Photographs
① Switch the power ON.
② Take a photograph.
Press the MODE button on the
camera. The display on the LCD monitor changes to 0.
Press the shutter button. You will hear a long peeping sound once,
and a photograph is taken. The number of photographs taken is added on the number
displayed on the LCD monitor.
Advice when Filming ・ Try not to move the camera until the number displayed on the
LCD monitor changes after pressing the shutter button. Your picture may get fuzzy.
--------------------- -------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------
・ You will not be able to film in a dark place. You will hear 2 short peeping sounds. Try filming
in a bright place. ----------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------
TOY DIGITAL 8 mm MOVIE !
Bee
User s Manual
!
If FFF is being displayed on the LCD monitor:
・ There may not be enough memory in the micro SD card.
・ The micro SD card may not be set in the camera. ！
Reset Button
Microphone
※The name of the folders may not be the same according to usage.
Bee
you can view & buy FUUVI product .
h t t p : / / f u u v i . s h o p - p r o . j p /
--------------------------------------------------------------------------------------------------------------------------
FUUVI ONLINE SHOP
・Charging time : Although it depends on the PC environments, it takes
approximately 1 hours for the battery to be fully charged. When the battery is fully charged, you will
hear continuing long peeping sounds, and the display on the LCD monitor disappears.
※ The camera will not operate properly when the battery is not fully charged. Please charge the battery full before first use.
How to Disconnect the Camera
When you connect the camera with the USB cable to the USB port of your computer,
it will be mounted on the desktop.
you can get more information about Bee
Be careful not to tighten too much when settling the camera on a tripod. It may cause damage. Caution ！
fully charged
removable disc