Digi 910H - Manual (Page 2)

Install Guide
Model: MIL-910H 2
I n t ro d u c t i o n
This user’s guide describes all features, covers installation and operating
instructions of the 910H in an easy-to-read yet thorough manner.
Pa ck ag e C o n t e n t s
The 910H package contains the following items:
• One 910H Hub
• One AC Power Adapter
• One BNC T-Connector
• This User’s Manual
• Four pieces Rubber Foot
• Two pieces Tapping Screw
• Two pieces Nylon Screw Anchor
F e a t u r e s O v e r v i ew
Your 910H Hub includes the following features:
• Interconnects one 10BASE2 segment and eight 10BASE-T link segments
• IEEE 802.3 10BASE2 and 10BASE-T compliant
• Can use either the BNC or the RJ-45 port as the cascading port
• Port auto-partitioning and reconnection to facilitate faulty segment isolation
• Polarity auto-detection and auto-correction for UTP ports
• Data collision and jabber handling functions
• Two LEDs per port to indicate Link, Transmit, Receive, Polarity and Partition
T h e 9 1 0 H H u b
The illustrations that follow depict the various external components of the hub.
Figure 1
LINK
RECEIVE
POLARITY
ETHERNET HUB 910H POWER COLLISION 1 2 3 4 5 6 7 8 9
TRANSMIT