D-Link DES-3208 - Manual (Page 31)

10/100 Fast Ethernet Switch User’s Guide
Connecting The Switch
17
10Base-T Hub
For a 10 Base-T hub, the Switch’s LED indicators should illuminate the
following:
♦
100M LED speed indicator is OFF.
♦
Link/Act indicator is ON.
♦
FDX/Col indicator is OFF.
100Base-TX Hub
For a 100Base-TX hub, the Switch’s LED indicators should illuminate the
following:
♦
100M LED speed indicator is ON.
♦
Link/Act is ON.
♦
FDX/Col LED indicator is OFF.
Hub without Uplink (MDI-II) port
If a hub is not equipped with an uplink (MDI-II) port, then connection can
be made using either straight cable or crossover cable (see Appendix A,
Technical Specifications for cable requirements).