D-Link DES-1004 - Manual (Page 18)

10/100 Fast Ethernet Switch User’s Guide
8
Unpacking and Setup
Figure 1 10/100 Fast Ethernet Switch installed on a Desktop or
Shelf
Wall Installation (DES-1004)
The DES-1004 comes complete with a wall mount kit. This kit includes two
screws and two plastic anchors. For a proper placement on the wall, follow
these steps:
♦
Select a site that is free of obstructions from other equipment or
devices. Consider the following points for site selection:
◊
The Switch should be placed high enough where LED indicators
can be observed and cable and power connections can be made.
◊
Moreover, decide whether you would like the Switch to point with
the front panel facing either up or down.