D-Link DCS-G900 - Manual (Page 50)

50
DCS-G900 User’s Manual
D-Link Systems, Inc.
IPView SE
How to Change the IP Address
To change a camera’s IP Address, you must highlight the camera you wish to change. Click
the
Change IP Address button and the Change IP Address dialog box will appear. Select
Manually Assign IP if you want to connect manually to the camera by providing the IP Address,
Subnet Mask, and Default Gateway. Select DHCP if you do not wish to assign an IP address
to your camera.
You may also click the Assign IP to a Camera button on the IPView SE, which will bring
up the Browse screen from above. Simply click the Change IP Address button and the Change
IP Address dialog box will appear. Select Manually Assign IP if you want to connect manually
to the camera by providing the IP Address, Subnet Mask, and Default Gateway. Select DHCP
if you would like to connect to only cameras on your network.