Dodge 2008 Durango User Manual

Page 37

Advertising
background image

When the remote keyless entry transmitter button is
pressed two times and the “Lamp Flash” feature is
enabled the turn signals will flash twice to signal that the
liftgate is opening or closing.

The power liftgate may also be opened by pressing the
switch located on the overhead console.

WARNING!

During power operation, personal injury or cargo
damage may occur. Ensure the liftgate travel path is
clear. Make sure the liftgate is closed and latched
before driving away.

A beeping signal will sound two seconds before the
liftgate starts to open or close.

NOTE:

• If anything obstructs the power liftgate while it is

closing or opening, the liftgate will automatically
reverse to the closed or open position, provided it
meets sufficient resistance.

• There are also pinch sensors attached to the side of the

liftgate. Light pressure anywhere along these strips
will cause the liftgate to return to the open position.

Power Liftgate Switch

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

37

2

Advertising
This manual is related to the following products: