Dixon RAM 42 2005 - Manual (Page 18)

SPECIFICATIONS
18
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Additional information may be provided elsewhere in this manual.
Residential Models
Chassis: 1-1/2 X 3 rectangle tube side frame
Mower Deck: 42” - 13 ga stamped 3 blade deck.
44” & 50” - 11 ga fabricated construction w/reinforcement .
Blade Drive: Electric clutch.
Transmission: Each rear wheel is independently driven by a Hydro
Gear IZT hydrostatic drive with 7” cooling fan.
Engine:
RAM 42:
18 HP Briggs & Stratton ELS, 4 cycle, single cylinder,
overhead valve, air cooled, gasoline, vertical shaft, cast
iron cylinder, full pressure lube with spin-on filter.
RAM 44/50: 22 HP Briggs & Stratton ELS, twin cylinder, overhead
valve, air cooled, gasoline, full pressure lube with oil
filter, vertical shaft, aluminum head & block with cast-
iron cylinder liners.
Starting Electric-key switch operation with safety interlock blade
System: drive.
Tires: Front 11 x 4.00-5 smooth tread (16-21 PSI)
42” - Rear 18x8.50-8--4 ply turf tread (8-14 PSI)
44/50” - Rear 18x9.50-8--4 ply turf tread (8-14 PSI)
Capacities: Fuel 5.5 gallons
Engine Oil Ram 42 - 1.5 quarts
Ram 44/50 - 2 quarts
Dimensions: Width 44” maximum track width
Height 39” to top edge of seat
Length 69” hitch tab to front bumper
Weight power unit - 474 lbs
with 42” deck - 575 lbs
with 44” deck - 600 lbs
with 50” deck - 620 lbs