Grandstream GXV3501 Series User Manual - Manual (Page 22)

GXV3501/GXV3504 Digital Video Server
Firmware 1.0.4.6 Page 22 of 36
Grandstream Networks, Inc. 09/2010
The default value is 5060.
Local RTP Port
– This parameter defines the local RTP-RTCP port pair that is used to
listen and transmit. The default value is 5004.
5. Click Save to save all the changes. You need to restart the device to apply all changes.
SIP Open Door Settings– Only applicable on GXV3501 .
Enable SIP open door – This will close the DO
connections in the back to close the circuit
connected to it.
Key to open the door – DTMF key to close the circuit. Digits 0-9 only.
Delay lock time (seconds) – This is the time in seconds that the circuit will remain closed
when this function is triggered
Configure Phone List Page
To make sure the GXV3501/GXV3504 can make phone calls to the number you preferred
when alarm is triggered. You need to add number to the phone list.
Steps to add phone number:
1. From the GXV3501/GXV3504 home page, click Basic Settings > SIP.
2. Go to Phone List Tab.
3. Enter the Phone number and name, click Add a Number to save all the changes.
4. Numbers added to the system will be listed in this page.
NOTE: With current firmware, only the first phone number in the list will be called when an
alarm is triggered.
GXV3501/GXV3504 Status Page
Available phone
numbers