Diamond Power Products R30ST User Manual

Owner's manual, Models r30nt & r30st, Advanced transportation products, inc

background image


Owner's Manual

Models R30NT & R30ST

Advanced Transportation Products, Inc.

400 Terry Ave. N Seattle, WA 98109 (206) 467-0231 fax: 467-0175

[email protected] — http://Cyclery.com/Vision


The Advanced Transportation Products Inc. Warranty

Advanced Transportation Products Inc. warrants each new VISION bicycle frame, fork,
and seat frame against defects in workmanship and materials for the lifetime of the original
owner. Paint and decals, seat fabric, and all original parts, are warranted for a period of one
year from the date of purchase. This warranty is expresssly limited to the repair or replace-
ment of a defective frame, fork, seat or defective parts and is the sole remedy of the warranty.
This warranty applies to the original owner and is not transferable.
Claims under this warranty are to be made through an authorized VISION dealer. Proof of
purchase is required. A Warranty Registration Card must be completed and received by
Advanced Transportation Products Inc. before warranty claims may be processed.
The warranty does not cover normal wear and tear, improper assembly or maintenance, or
installation of parts or accessories not originally intended or compatible with the bicycle as
The warranty does not apply to damage or failure due to accident, abuse or neglect.
Advanced Transportation Products Inc. shall not be responsible for incidental or conse-
quential damages. Labor charges for part changeovers is not covered by this warranty. The
user assumes the risk of any personal injury or damage to the bicycle or other losses if the
bicycle is used in any competitive event including but not limited to bicycle racing, triathalons,
or similar activities.

Quick Information

Tire & Wheel information


R30: 406 bead seat diameter, 1"-1.75" wide (ex 20 x 1.5")


R30: 349mm bead seat dia, 1"-1.5" wide (ex 16 x 1 3/8")

Inflation pressures:

Inflate to the pressure moulded on tire sidewall

Torque specifications:

Pinch bolt type: 6mm x 1mm -- 25mm long
Handlebar Extension: 65 in-lbs (6 N-M)
Handlebar Stem: 65 in-lbs (6 N-M)


Nexus Hub, Standard Frame = 206 links
Nexus Hub, X-Long Frame = 221 links

3x7 Hub, Standard Frame = 206 Links
3x7 Hub, X-Long Frame = 221 Links

Serial number location:

Stamped on the back plate, at the end of the main frame.

This manual is related to the following products: