Gear ranges for four speed automatic, Transaxle – Dodge 2005 JR41 Stratus User Manual

Page 148

Advertising
background image

NOTE:

Even if the transaxle can be reset, it is recom-

mended that you visit a dealer at your earliest possible
convenience. Your dealer has diagnostic equipment to
determine if the problem could recur.

If the transaxle cannot be reset, dealer service is required.

Gear Ranges For Four Speed Automatic
Transaxle
DO NOT race the engine when shifting from PARK or
NEUTRAL positions into another gear range.

NOTE:

If the key is in the RUN position, you must

press the brake pedal to shift out of the “P” Park position.

“P” Park
Supplements parking by locking the transaxle. Engine
can be started in this range. Never attempt to use PARK
while vehicle is in motion.

Apply parking brake when leaving the vehicle in this
range.

WARNING!

Your vehicle could move and injure you and others if
it is not completely in P (Park). Check by trying to
move the gearshift lever back and forth without
depressing the shift button after you have set it in P.
Make sure it is in Park before leaving the vehicle.

WARNING!

Never use the Park position as a substitute for the
parking brake. Always apply the parking brake fully
when parked to guard against vehicle movement and
possible injury or damage.

“R” Reverse
Shift into this range only after the vehicle has come to a
complete stop.

“N” Neutral
Engine may be started in this range.

148

STARTING AND OPERATING

Advertising
This manual is related to the following products: