Grip Factory Munich GF-Jib Arm - Manual

Grip Factory Munich
YOUR INNOVATIVE PARTNER FOR CAMERA SUPPORT
GF-Jib Arm
Note: Prior to assembly, ensure that the base dolly the jib will be mounted on is
positioned on a flat, stable, level surface. Ensure that all locking pins (1 & 2) are
inserted and all pan and tilt brakes and drag locks (6, 7 & 8) are locked.
The respective protective clothing e.g. gloves, should be worn.
1. Mount the jib on the dolly and lock securely with the wing nut (9) located on the pivot
section.
1 2
1. Front locking pin
2. Rod locking pin
3. Extension lock 1
4. Extension lock 2
5. Pivot section
3 4 5
7
8
6
6. Tilt drag
7. Tilt brake
8. Pan lock
9
9. Wing nut lock
10. Hand crank
11. Counterweight rod
lock
10
11