Guralp Systems CMG-CD24R8 User Manual
Page 12
CD24-R8
narrow the selection by clicking on an entry in the tree on the
left.
A WiPort-NR entry should appear in the table on the right,
indicating that a device has been detected. If more than one
WiPort-NR entry appears, DeviceInstaller has detected several
devices.
For every detected device, the program shows the Hardware
Address (i.e. the MAC address), and the IP address it is currently
using. If your local network uses a DHCP server, the device will
ask the DHCP server to assign it an address. Otherwise, a
random address (APIPA) will be chosen automatically.
Automatic random addresses all begin with 169.254. The
CD24-R8 will choose a different one every time it is power-
cycled or rebooted.
7. The address of the CD24-R8 may be shown in red with the
status Unreachable. If this happens, the digitiser and PC cannot
communicate because they are not on the same subnet. Click
Assign IP to start the IP configuration wizard.
12
Issue B