Harken 7413.15 MKIV Hydraulic Jib Reefing & Furling - Manual (Page 17)

MKIV Hydraulic Unit 3 17
Start plunger into injector and immediately
hold upright so plunger is down and
applicator tip is up.
As sealant runs down towards plunger an
air pocket will form near tip. Push plunger
to evacuate air. You are now ready to begin
injecting adhesive.
Hold plastic wedge in place with thumb
as you insert into foil. Line foil holes
with connector screw holes.
Put a drop of adhesive into screw holes.
Assembly Foils/Connectors