Denon DVD-1940CI - Manual (Page 14)

– 14 – EN
CONNECTIONS
Connection to 5.1-channel Surround Sound System
Analog 5.1-channel audio signals can be output from the DVD player.
The multi-channel audio signals recorded in packed PCM and the multi-channel Super Audio CDs can be
played back when an AV amplifier equipped with analog 5.1-channel audio inputs is connected.
AUDIO
DVD
To 5.1-channel
Audio Input
Jacks
AV amplifier
with
5.1-channel
audio input jacks
5.1ch
AUDIO OUT
Front speaker
(left)
Surround
speaker
(left)
Center speaker
Subwoofer
Surround
speaker
(right)
Front speaker
(right)
Speaker
Cable
(commercially
available)
NOTES:
• For 5.1-channel connections, set ANALOG AUDIO to MULTI CHANNEL in the setup mode and adjust Speaker
Configuration, DELAY TIME and CHANNEL LEVEL settings (refer to page 30).
• You can enjoy high-quality analog sound by cutting off the video signal. Press the PURE DIRECT button on the front panel.
– 14 – EN
E6EE0UD(EN).qx4 07.5.15 9:44 AM Page 14