Hoefer SE400 - Manual (Page 32)

•
p24
3. Care and maintenance
Cleaning
• Rinse with water immediately after use.
• Do not autoclave or heat any part of the instrument
above 45 °C.
• Do not use organic solvents, abrasives, strong
cleaning solutions, or strong acids or bases to clean
any plastic part.
• Do not soak the gaskets. Clean with a mild detergent
and allow to air dry.
• Handle the safety lid with care to prevent damage to
the electrode connectors.
Clean glass plates and spacers with a dilute
solution of a laboratory cleanser such as
RBS-35
™ , then rinse thoroughly with tap and
distilled water. Glass plates can also be treated
with (but not stored in) acid cleaning solutions.