Hoefer PS2A200 - Manual (Page 11)

Power output is controlled by setting a maximum
value for voltage (1 to 200 V), current (1 to
2000 mA), or watts (1 to 200 W). The PS2A200
automatically “crosses over,” or switches the
controlling parameter according to programmed
limits as resistivity changes during a run. Run
duration can be untimed or programmed to a
maximum of 99 h and 59 min. A printed record
of the power supplied during a run can be
obtained by connecting the RS232 serial communi-
cations port to a printer.
Unpacking
Unwrap all packages carefully and compare
contents with the packing list, making sure all
items arrived. If any part is missing, contact
your local Hoefer, Inc. sales office. Inspect all
components for damage that may have occurred
while the unit was in transit. If any part appears
damaged, contact the carrier immediately. Be
sure to keep all packing material for damage
claims or to use should it become necessary to
return the unit.
•
p2